Fin heat exchangers
We have at our disposal three independently working production lines of lamellar packets using copper pipes: 10mm; 12mm; 16mm. The offered packet types are :
- ALUMINIUM: standard exchangers (water, steam, evaporators, condensers)
- ALUMINIUM EPOXIDATED : used in exchangers working in conditions of increased aluminium corrosion risk, e.g. evaporators in efrigerated counters,
- ALUMINIUM MAGNESIUM : improved resistance, naval conditions, slightly alkaline environments
- COPPER : improved resistance, typically used in mining industry.
| Type of geometry | Lamellae spacing |
| Ø10 25x21,65 | 1,6 ÷ 7,0mm |
| Ø12 32x27,7 | 1,6 ÷ 7,0mm |
| Ø16 55,0x27,5 | 1,6 ÷ 14,0mm |
| Ø16 55,0x55,0 | 1,6 ÷ 14,0mm |
aaaaaaaaaaaaaaaaaa
| SEND INQUIRY | CALL US |
Round duct water coolers CWK-O
Tunnel Coolers CWK-O are designed to be built
in between the tunnels
with round cross-section
in ventilation or air-conditioning systems.
in between the tunnels
with round cross-section
in ventilation or air-conditioning systems.
Duct water heaters NWK
Duct heaters NWK are designed to be built in between the ducts of the ventilation or air-conditioning system with round cross-section. As standard, they are produced in 6 sizes from Φ200 to Φ500, as single- or two-pass exchangers.
Freon frame coolers CFR
Freon frame coolers CFR are designed to be built in between the ducts of the ventilation or air-conditioning system with rectangular cross-section. As standard, they are produced in 16 sizes from 200x200mm to 1200x1200mm
Water frame heaters NWR
They Are designed to be built in between the ventilation or air-conditioning ducts with rectangular cross-section. As standard, they are produced in 16 sizes for ducts from 200x200mm to 1200x1200mm
